#NISSAN DATA SCAN NATS CONFIGURE CODE#

Generally when the request switch is pressed, the BCM energizes only the respective door antenna. For (C) and (L) try to calculate the PIN code by SEC label, BCM to PIN (software), BCM to PIN (online), Dump to PIN or PIN code by BCM seed (20 chars code) for newest Nissan models. Three outside key antennas are installed on the vehicle: the outside key antenna RH, the outside key antenna LH and the outside key antenna rear bumper/fascia. Map Data Dvd 2013 Navteq Nissan (.torrent. If these conditions are satisfied, door lock/unlock operation is performed. If the Intelligent Key is within the outside key antenna detection area, it receives the request signal and transmits the key ID signal to the BCM via the remote keyless entry receiver. Therefore, all of the customerвЂ™s keys should be obtained before starting this procedure.

#NISSAN DATA SCAN NATS CONFIGURE MANUAL#

When the BCM detects that a door request switch is pressed, it activates the outside key antenna corresponding to the pressed door request switch and transmits the request signal to the Intelligent Key. Choose Maintenance function->NATS (Nissan Anti-theft system)-> Manual selection test->After replacing or installing operation->Replace ECM (Used Part) This procedure erase all registered keys.

#NISSAN DATA SCAN NATS CONFIGURE VERIFICATION#

The BCM performs ID verification between the BCM and Intelligent Key when the Intelligent Key is carried into the detection area of the outside key antenna so it can perform the door lock/unlock operation. Place charge anywhere between 50-150 to do this procedure. UPDATE: Septem WeвЂ™ve programmed various ECUs this year and programming worked 100. The remote keyless entry receiver receives each button operation signal and electronic key ID signal from the Intelligent Key and then transmits the signal to the BCM. Easily Program NATS 1999-2003 Maxima Keys with Nissan Datascan II. The power lock system relies on the Intelligent Key to transmit button operation to the remote keyless entry receiver to function. Note that actual support will vary by vehicle year and model - you can check what datapoints your vehicle will support by using the Compatibility Tool. The table below lists all standard OBDII live data accessible using BlueDriver. The Body Control Module (BCM) on Nissan and Infiniti vehicles controls various electrical components, including the vehicle immobilizer system and the power door lock system Modified on: Tue, 4 Feb, 2020 at 11:56 AM.

Nissan data scan nats configure